passer mon pc en usb3 • page 2

Pac428 · le 27 Oct 2021 16:15

Salut Ricky

est-ce que je peux brancher ma petite prise noire en L sur la bleu ou la orange de la carte mère ?

Oui c'est une prise Sata et tes prises bleues et oranges aussi. Tu ne risques pas grand chose.

D'ailleurs, à quoi sert-elle ?

Bah a être branchée sur une prise Sata pour alimenter ta façade et peut-être transmettre des données.

Avec un coup de bol, ça pourrait t'éviter d'avoir à brancher la prise bleue. Mais bon ...

La réponse est forcément dans le manuel de ta façade même si c'est une feuille de papier en Chinois.

RTFM et ++ Ricky

ricky85 · le 27 Oct 2021 16:47

Merci pour ta réponse, je vais brancher cette prise noire.
Pour la notice, il n'y en a pas, même pas en chinois, juste un descriptif en allemand.
Donc, juste ça :

EinsteinZero · le 27 Oct 2021 17:23

d'après ta photo de doc,
>la prise bleue, c'est une USB3 pour connecteur USB3 interne carte mère/carte PCI USB3,
>la noir c'est du eSata pour déporter une connexion sata de la CM en extérieur
>y'a une molex pour l'alimentation,
>une USB2 interne à connecter sur la CM

ricky85 · le 27 Oct 2021 17:29

Merci
Je récapitule.

La grosse bleue c'est pour la carte PCI-E que j'ai commandé.
La noire en L je l'ai branché sur la CM sur la bleue.
La molex c'est fait il y en a plusieurs de libre.
L'usb 2 c'est fait aussi, branchée sur la CM.
Donc plus qu'à attendre la carte. :wink:

Sinon j'ai inséré une micro SD et une SD, ça ne fonctionne pas, ça ira avec la carte ?

EinsteinZero · le 27 Oct 2021 17:59

t'as tout dit :wink:

pour la SD, oui elle utilise probablement l'USB3 car il y a de nombreux circuits adaptateurs SD--->USB aussi autant l'USB3 plus rapide..ils auraient pu utiliser l'USB 2 mais ç'eut été dommage car moins bon débit

ricky85 · le 27 Oct 2021 18:31

Merci, plus qu'à attendre la carte.
J'ai utilisé une micro SD dans un support USB, je n'est pas chronométré mais c'est bien plus rapide qu'une "simple" USB.

Je ferais un comparatif.
USB2
USB3
carte SD dans support USB

Bonne soirée
Et merci pour toutes les infos. :wink:

ricky85 · le 01 Nov 2021 16:46

Bonjour
Voilà, la carte est sur la carte mère, pas de souci pour la mettre.
J'ai branché dessus derrière le pc l'imprimante et le scanner, est-ce que ça ira plus vite ?
C'est deux périphériques fonctionnent parfaitement.
Le souci, ben oui c'est comme d'habitude

Si je mets une clé USB ou une carte SD en façade, la LED s'allume, donc elle est détectée, mais rien n'apparait sur le bureau.
Il manque un paquet pour faire fonctionner cette carte ?

Au fait, à gauche en façade il y a une USB orange, à quoi sert-elle et pourquoi orange ?

J'ai lancé le gestionnaire de pilote, réponse " votre ordinateur ne requiert aucun pilote additionnel"

Merci :wink:

ricky85 · le 01 Nov 2021 18:32

J'ai éteint le pc, en le rallumant la clé support de carte SD est détectée.
Donc mes essais :

-PC en USB2 → USB, 2 minutes pour 489,7 mb
-PC en USB2 → carte SD, 1,45 minute pour 489,7 mb
-PC en USB3 → support de carte SD, 2,18 minutes pour 489,7 mb

Carte SD ou micro SD n'est pas détectée ?

J'ai dépensé 50 € pour que ce soit plus lent. :cry:

diogene · le 01 Nov 2021 18:37

Bonjour,

Pour savoir ce qui se passe quand tu insères ta clé, tu démarres sans la clé et tu tapes dans un Terminal :
sudo dmesg -T
Tu repères bien la dernière ligne.

Tu insères la clé et tu retapes la même commande, plusieurs lignes se seront ajoutées après celle que tu as repérée. Elles correspondent à ce que le système a détecté.
Tu les recopies dans ton prochain message.

ricky85 · le 01 Nov 2021 18:40

Merci
je ne pense pas avoir compris, il y a plusieurs centaines de lignes.
Les dernières lignes:

Code: Tout sélectionner: 7 80 00 00 08 00 [lun. nov. 1 18:37:51 2021] blk_update_request: I/O error, dev sdd, sector 7698304 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [lun. nov. 1 18:37:51 2021] usb 13-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [lun. nov. 1 18:37:51 2021] usb 13-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [lun. nov. 1 18:37:52 2021] usb 13-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [lun. nov. 1 18:37:52 2021] usb 13-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [lun. nov. 1 18:37:52 2021] usb 13-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [lun. nov. 1 18:37:52 2021] usb 13-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [lun. nov. 1 18:37:52 2021] sd 4:0:0:2: [sdd] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [lun. nov. 1 18:37:52 2021] sd 4:0:0:2: [sdd] tag#0 CDB: Read(10) 28 00 00 75 77 80 00 00 08 00 [lun. nov. 1 18:37:52 2021] blk_update_request: I/O error, dev sdd, sector 7698304 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [lun. nov. 1 18:37:52 2021] Buffer I/O error on dev sdd, logical block 962288, async page read

Si je n'ai pas commis d'erreur après avoir retapé la commande :

Code: Tout sélectionner: [lun. nov. 1 18:40:53 2021] usb 13-3: new SuperSpeed Gen 1 USB device number 13 using xhci_hcd [lun. nov. 1 18:40:53 2021] usb 13-3: New USB device found, idVendor=2537, idProduct=1081, bcdDevice= 1.00 [lun. nov. 1 18:40:53 2021] usb 13-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [lun. nov. 1 18:40:53 2021] usb 13-3: Product: NS1081 [lun. nov. 1 18:40:53 2021] usb 13-3: Manufacturer: Norelsys [lun. nov. 1 18:40:53 2021] usb 13-3: SerialNumber: 0123456789ABCDE [lun. nov. 1 18:40:53 2021] usb-storage 13-3:1.0: USB Mass Storage device detected [lun. nov. 1 18:40:53 2021] scsi host5: usb-storage 13-3:1.0 [lun. nov. 1 18:40:55 2021] scsi 5:0:0:0: Direct-Access NORELSYS 1081CS1 PQ: 0 ANSI: 6 [lun. nov. 1 18:40:55 2021] sd 5:0:0:0: Attached scsi generic sg7 type 0 [lun. nov. 1 18:40:55 2021] sd 5:0:0:0: [sdg] 7698432 512-byte logical blocks: (3.94 GB/3.67 GiB) [lun. nov. 1 18:40:55 2021] sd 5:0:0:0: [sdg] Write Protect is off [lun. nov. 1 18:40:55 2021] sd 5:0:0:0: [sdg] Mode Sense: 23 00 00 00 [lun. nov. 1 18:40:55 2021] sd 5:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [lun. nov. 1 18:40:55 2021] sdg: sdg1 [lun. nov. 1 18:40:55 2021] sd 5:0:0:0: [sdg] Attached SCSI removable disk [lun. nov. 1 18:40:56 2021] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

ricky85 · le 01 Nov 2021 19:36

Avec une carte SD, la commande dmesg | tail

donne ça :
[11207.310781] sdd: sdd1

diogene · le 01 Nov 2021 21:53

Tu as des erreurs au montage. Quelques exemples :

I/O error, dev sdd, sector 7698304 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
sd 4:0:0:2: [sdd] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Buffer I/O error on dev sdd, logical block 962288, async page read

Tu es certain de ta clé ou de ta carte SD ?

D'autre part, je ne comprends pas cette ligne :
FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Tu as branché (ou plutôt débranché) une autre clé ?

ricky85 · le 01 Nov 2021 21:56

Uniquement mon support de carte SD.
J'essaye avec une autre clé pour voir.
Résultat :

Code: Tout sélectionner: [lun. nov. 1 21:59:34 2021] usb 12-3: USB disconnect, device number 5

avec la clé :

Code: Tout sélectionner: [lun. nov. 1 21:43:18 2021] microcode: microcode updated early to revision 0xa4, date = 2010-10-02 [lun. nov. 1 21:43:18 2021] Linux version 5.4.0-88-generic (buildd@lgw01-amd64-008) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #99-Ubuntu SMP Thu Sep 23 17:29:00 UTC 2021 (Ubuntu 5.4.0-88.99-generic 5.4.140) [lun. nov. 1 21:43:18 2021] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-88-generic root=UUID=182c280c-08c6-4245-90dd-5e2cdb5f23ba ro quiet splash [lun. nov. 1 21:43:18 2021] KERNEL supported cpus: [lun. nov. 1 21:43:18 2021] Intel GenuineIntel [lun. nov. 1 21:43:18 2021] AMD AuthenticAMD [lun. nov. 1 21:43:18 2021] Hygon HygonGenuine [lun. nov. 1 21:43:18 2021] Centaur CentaurHauls [lun. nov. 1 21:43:18 2021] zhaoxin Shanghai [lun. nov. 1 21:43:18 2021] x86/fpu: x87 FPU will use FXSAVE [lun. nov. 1 21:43:18 2021] BIOS-provided physical RAM map: [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x0000000000100000-0x00000000cf69ffff] usable [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x00000000cf6a0000-0x00000000cf6adfff] ACPI data [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x00000000cf6ae000-0x00000000cf6dffff] ACPI NVS [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x00000000cf6e0000-0x00000000cf6fffff] reserved [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [lun. nov. 1 21:43:18 2021] BIOS-e820: [mem 0x0000000100000000-0x00000001efffffff] usable [lun. nov. 1 21:43:18 2021] NX (Execute Disable) protection: active [lun. nov. 1 21:43:18 2021] SMBIOS 2.5 present. [lun. nov. 1 21:43:18 2021] DMI: Hewlett-Packard HP Compaq dx2400 Microtower PC/2A73h, BIOS 5.37 02/23/2009 [lun. nov. 1 21:43:18 2021] tsc: Fast TSC calibration using PIT [lun. nov. 1 21:43:18 2021] tsc: Detected 2000.037 MHz processor [lun. nov. 1 21:43:18 2021] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [lun. nov. 1 21:43:18 2021] e820: remove [mem 0x000a0000-0x000fffff] usable [lun. nov. 1 21:43:18 2021] last_pfn = 0x1f0000 max_arch_pfn = 0x400000000 [lun. nov. 1 21:43:18 2021] MTRR default type: uncachable [lun. nov. 1 21:43:18 2021] MTRR fixed ranges enabled: [lun. nov. 1 21:43:18 2021] 00000-9FFFF write-back [lun. nov. 1 21:43:18 2021] A0000-BFFFF uncachable [lun. nov. 1 21:43:18 2021] C0000-DFFFF write-protect [lun. nov. 1 21:43:18 2021] E0000-EFFFF write-through [lun. nov. 1 21:43:18 2021] F0000-FFFFF write-protect [lun. nov. 1 21:43:18 2021] MTRR variable ranges enabled: [lun. nov. 1 21:43:18 2021] 0 base 0D0000000 mask FF0000000 uncachable [lun. nov. 1 21:43:18 2021] 1 base 0E0000000 mask FE0000000 uncachable [lun. nov. 1 21:43:18 2021] 2 base 000000000 mask F00000000 write-back [lun. nov. 1 21:43:18 2021] 3 base 100000000 mask F80000000 write-back [lun. nov. 1 21:43:18 2021] 4 base 180000000 mask FC0000000 write-back [lun. nov. 1 21:43:18 2021] 5 base 1C0000000 mask FE0000000 write-back [lun. nov. 1 21:43:18 2021] 6 base 1E0000000 mask FF0000000 write-back [lun. nov. 1 21:43:18 2021] 7 disabled [lun. nov. 1 21:43:18 2021] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [lun. nov. 1 21:43:18 2021] total RAM covered: 7168M [lun. nov. 1 21:43:18 2021] Found optimal setting for mtrr clean up [lun. nov. 1 21:43:18 2021] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G [lun. nov. 1 21:43:18 2021] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [lun. nov. 1 21:43:18 2021] last_pfn = 0xcf6a0 max_arch_pfn = 0x400000000 [lun. nov. 1 21:43:18 2021] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [lun. nov. 1 21:43:18 2021] check: Scanning 1 areas for low memory corruption [lun. nov. 1 21:43:18 2021] RAMDISK: [mem 0x2d801000-0x32bf7fff] [lun. nov. 1 21:43:18 2021] ACPI: Early table checksum verification disabled [lun. nov. 1 21:43:18 2021] ACPI: RSDP 0x00000000000FC440 000014 (v00 HPQOEM) [lun. nov. 1 21:43:18 2021] ACPI: RSDT 0x00000000CF6A0000 000044 (v01 HPQOEM SLIC-BPC 20090223 MSFT 00000097) [lun. nov. 1 21:43:18 2021] ACPI: FACP 0x00000000CF6A0200 000084 (v02 HPQOEM SLIC-BPC 20090223 MSFT 00000097) [lun. nov. 1 21:43:18 2021] ACPI: DSDT 0x00000000CF6A0440 004E91 (v01 HPQOEM SLIC-BPC 00000000 INTL 20051117) [lun. nov. 1 21:43:18 2021] ACPI: FACS 0x00000000CF6AE000 000040 [lun. nov. 1 21:43:18 2021] ACPI: APIC 0x00000000CF6A0390 00006C (v01 HPQOEM SLIC-BPC 20090223 MSFT 00000097) [lun. nov. 1 21:43:18 2021] ACPI: MCFG 0x00000000CF6A0400 00003C (v01 HPQOEM SLIC-BPC 20090223 MSFT 00000097) [lun. nov. 1 21:43:18 2021] ACPI: OEMB 0x00000000CF6AE040 000072 (v01 HPQOEM SLIC-BPC 20090223 MSFT 00000097) [lun. nov. 1 21:43:18 2021] ACPI: HPET 0x00000000CF6A52E0 000038 (v01 HPQOEM SLIC-BPC 20090223 MSFT 00000097) [lun. nov. 1 21:43:18 2021] ACPI: GSCI 0x00000000CF6AE0C0 002024 (v01 HPQOEM SLIC-BPC 20090223 MSFT 00000097) [lun. nov. 1 21:43:18 2021] ACPI: SLIC 0x00000000CF6B00F0 000176 (v01 HPQOEM SLIC-BPC 00000001 MSFT 00000001) [lun. nov. 1 21:43:18 2021] ACPI: SSDT 0x00000000CF6B0B90 00082F (v01 HPQOEM SLIC-BPC 00000012 INTL 20051117) [lun. nov. 1 21:43:18 2021] ACPI: Reserving FACP table memory at [mem 0xcf6a0200-0xcf6a0283] [lun. nov. 1 21:43:18 2021] ACPI: Reserving DSDT table memory at [mem 0xcf6a0440-0xcf6a52d0] [lun. nov. 1 21:43:18 2021] ACPI: Reserving FACS table memory at [mem 0xcf6ae000-0xcf6ae03f] [lun. nov. 1 21:43:18 2021] ACPI: Reserving APIC table memory at [mem 0xcf6a0390-0xcf6a03fb] [lun. nov. 1 21:43:18 2021] ACPI: Reserving MCFG table memory at [mem 0xcf6a0400-0xcf6a043b] [lun. nov. 1 21:43:18 2021] ACPI: Reserving OEMB table memory at [mem 0xcf6ae040-0xcf6ae0b1] [lun. nov. 1 21:43:18 2021] ACPI: Reserving HPET table memory at [mem 0xcf6a52e0-0xcf6a5317] [lun. nov. 1 21:43:18 2021] ACPI: Reserving GSCI table memory at [mem 0xcf6ae0c0-0xcf6b00e3] [lun. nov. 1 21:43:18 2021] ACPI: Reserving SLIC table memory at [mem 0xcf6b00f0-0xcf6b0265] [lun. nov. 1 21:43:18 2021] ACPI: Reserving SSDT table memory at [mem 0xcf6b0b90-0xcf6b13be] [lun. nov. 1 21:43:18 2021] ACPI: Local APIC address 0xfee00000 [lun. nov. 1 21:43:18 2021] No NUMA configuration found [lun. nov. 1 21:43:18 2021] Faking a node at [mem 0x0000000000000000-0x00000001efffffff] [lun. nov. 1 21:43:18 2021] NODE_DATA(0) allocated [mem 0x1effd5000-0x1efffffff] [lun. nov. 1 21:43:18 2021] Zone ranges: [lun. nov. 1 21:43:18 2021] DMA [mem 0x0000000000001000-0x0000000000ffffff] [lun. nov. 1 21:43:18 2021] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [lun. nov. 1 21:43:18 2021] Normal [mem 0x0000000100000000-0x00000001efffffff] [lun. nov. 1 21:43:18 2021] Device empty [lun. nov. 1 21:43:18 2021] Movable zone start for each node [lun. nov. 1 21:43:18 2021] Early memory node ranges [lun. nov. 1 21:43:18 2021] node 0: [mem 0x0000000000001000-0x000000000009efff] [lun. nov. 1 21:43:18 2021] node 0: [mem 0x0000000000100000-0x00000000cf69ffff] [lun. nov. 1 21:43:18 2021] node 0: [mem 0x0000000100000000-0x00000001efffffff] [lun. nov. 1 21:43:18 2021] Zeroed struct page in unavailable ranges: 2498 pages [lun. nov. 1 21:43:18 2021] Initmem setup node 0 [mem 0x0000000000001000-0x00000001efffffff] [lun. nov. 1 21:43:18 2021] On node 0 totalpages: 1832510 [lun. nov. 1 21:43:18 2021] DMA zone: 64 pages used for memmap [lun. nov. 1 21:43:18 2021] DMA zone: 21 pages reserved [lun. nov. 1 21:43:18 2021] DMA zone: 3998 pages, LIFO batch:0 [lun. nov. 1 21:43:18 2021] DMA32 zone: 13211 pages used for memmap [lun. nov. 1 21:43:18 2021] DMA32 zone: 845472 pages, LIFO batch:63 [lun. nov. 1 21:43:18 2021] Normal zone: 15360 pages used for memmap [lun. nov. 1 21:43:18 2021] Normal zone: 983040 pages, LIFO batch:63 [lun. nov. 1 21:43:18 2021] Reserving Intel graphics memory at [mem 0xcf800000-0xcfffffff] [lun. nov. 1 21:43:18 2021] ACPI: PM-Timer IO Port: 0x808 [lun. nov. 1 21:43:18 2021] ACPI: Local APIC address 0xfee00000 [lun. nov. 1 21:43:18 2021] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [lun. nov. 1 21:43:18 2021] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [lun. nov. 1 21:43:18 2021] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [lun. nov. 1 21:43:18 2021] ACPI: IRQ0 used by override. [lun. nov. 1 21:43:18 2021] ACPI: IRQ9 used by override. [lun. nov. 1 21:43:18 2021] Using ACPI (MADT) for SMP configuration information [lun. nov. 1 21:43:18 2021] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [lun. nov. 1 21:43:18 2021] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0xcf6a0000-0xcf6adfff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0xcf6ae000-0xcf6dffff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0xcf6e0000-0xcf6fffff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0xcf700000-0xcf7fffff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff] [lun. nov. 1 21:43:18 2021] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff] [lun. nov. 1 21:43:18 2021] [mem 0xd0000000-0xfedfffff] available for PCI devices [lun. nov. 1 21:43:18 2021] Booting paravirtualized kernel on bare hardware [lun. nov. 1 21:43:18 2021] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [lun. nov. 1 21:43:18 2021] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [lun. nov. 1 21:43:18 2021] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288 [lun. nov. 1 21:43:18 2021] pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152 [lun. nov. 1 21:43:18 2021] pcpu-alloc: [0] 0 1 2 3 [lun. nov. 1 21:43:18 2021] Built 1 zonelists, mobility grouping on. Total pages: 1803854 [lun. nov. 1 21:43:18 2021] Policy zone: Normal [lun. nov. 1 21:43:18 2021] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-88-generic root=UUID=182c280c-08c6-4245-90dd-5e2cdb5f23ba ro quiet splash [lun. nov. 1 21:43:18 2021] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [lun. nov. 1 21:43:18 2021] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [lun. nov. 1 21:43:18 2021] mem auto-init: stack:off, heap alloc:on, heap free:off [lun. nov. 1 21:43:18 2021] Calgary: detecting Calgary via BIOS EBDA area [lun. nov. 1 21:43:18 2021] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [lun. nov. 1 21:43:18 2021] Memory: 7017156K/7330040K available (14339K kernel code, 2400K rwdata, 5016K rodata, 2728K init, 4972K bss, 312884K reserved, 0K cma-reserved) [lun. nov. 1 21:43:18 2021] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [lun. nov. 1 21:43:18 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [lun. nov. 1 21:43:18 2021] Kernel/User page tables isolation: enabled [lun. nov. 1 21:43:18 2021] ftrace: allocating 44613 entries in 175 pages [lun. nov. 1 21:43:18 2021] rcu: Hierarchical RCU implementation. [lun. nov. 1 21:43:18 2021] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [lun. nov. 1 21:43:18 2021] Tasks RCU enabled. [lun. nov. 1 21:43:18 2021] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [lun. nov. 1 21:43:18 2021] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [lun. nov. 1 21:43:18 2021] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [lun. nov. 1 21:43:18 2021] Console: colour dummy device 80x25 [lun. nov. 1 21:43:18 2021] printk: console [tty0] enabled [lun. nov. 1 21:43:18 2021] ACPI: Core revision 20190816 [lun. nov. 1 21:43:18 2021] ACPI BIOS Warning (bug): Incorrect checksum in table [OEMB] - 0x9E, should be 0x9D (20190816/tbprint-173) [lun. nov. 1 21:43:18 2021] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [lun. nov. 1 21:43:18 2021] APIC: Switch to symmetric I/O mode setup [lun. nov. 1 21:43:18 2021] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [lun. nov. 1 21:43:18 2021] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cd45134815, max_idle_ns: 440795290424 ns [lun. nov. 1 21:43:18 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.07 BogoMIPS (lpj=8000148) [lun. nov. 1 21:43:18 2021] pid_max: default: 32768 minimum: 301 [lun. nov. 1 21:43:18 2021] LSM: Security Framework initializing [lun. nov. 1 21:43:18 2021] Yama: becoming mindful. [lun. nov. 1 21:43:18 2021] AppArmor: AppArmor initialized [lun. nov. 1 21:43:18 2021] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [lun. nov. 1 21:43:18 2021] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [lun. nov. 1 21:43:18 2021] *** VALIDATE tmpfs *** [lun. nov. 1 21:43:18 2021] *** VALIDATE proc *** [lun. nov. 1 21:43:18 2021] *** VALIDATE cgroup1 *** [lun. nov. 1 21:43:18 2021] *** VALIDATE cgroup2 *** [lun. nov. 1 21:43:18 2021] mce: CPU0: Thermal monitoring enabled (TM2) [lun. nov. 1 21:43:18 2021] process: using mwait in idle threads [lun. nov. 1 21:43:18 2021] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [lun. nov. 1 21:43:18 2021] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [lun. nov. 1 21:43:18 2021] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [lun. nov. 1 21:43:18 2021] Spectre V2 : Mitigation: Full generic retpoline [lun. nov. 1 21:43:18 2021] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [lun. nov. 1 21:43:18 2021] Speculative Store Bypass: Vulnerable [lun. nov. 1 21:43:18 2021] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [lun. nov. 1 21:43:18 2021] Freeing SMP alternatives memory: 40K [lun. nov. 1 21:43:18 2021] smpboot: CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd) [lun. nov. 1 21:43:18 2021] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [lun. nov. 1 21:43:18 2021] core: PEBS disabled due to CPU errata [lun. nov. 1 21:43:18 2021] ... version: 2 [lun. nov. 1 21:43:18 2021] ... bit width: 40 [lun. nov. 1 21:43:18 2021] ... generic registers: 2 [lun. nov. 1 21:43:18 2021] ... value mask: 000000ffffffffff [lun. nov. 1 21:43:18 2021] ... max period: 000000007fffffff [lun. nov. 1 21:43:18 2021] ... fixed-purpose events: 3 [lun. nov. 1 21:43:18 2021] ... event mask: 0000000700000003 [lun. nov. 1 21:43:18 2021] rcu: Hierarchical SRCU implementation. [lun. nov. 1 21:43:18 2021] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [lun. nov. 1 21:43:18 2021] smp: Bringing up secondary CPUs ... [lun. nov. 1 21:43:18 2021] x86: Booting SMP configuration: [lun. nov. 1 21:43:18 2021] .... node #0, CPUs: #1 [lun. nov. 1 21:43:18 2021] smp: Brought up 1 node, 2 CPUs [lun. nov. 1 21:43:18 2021] smpboot: Max logical packages: 2 [lun. nov. 1 21:43:18 2021] smpboot: Total of 2 processors activated (8000.14 BogoMIPS) [lun. nov. 1 21:43:18 2021] devtmpfs: initialized [lun. nov. 1 21:43:18 2021] x86/mm: Memory block size: 128MB [lun. nov. 1 21:43:18 2021] PM: Registering ACPI NVS region [mem 0xcf6ae000-0xcf6dffff] (204800 bytes) [lun. nov. 1 21:43:18 2021] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [lun. nov. 1 21:43:18 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [lun. nov. 1 21:43:18 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [lun. nov. 1 21:43:18 2021] pinctrl core: initialized pinctrl subsystem [lun. nov. 1 21:43:18 2021] PM: RTC time: 20:43:19, date: 2021-11-01 [lun. nov. 1 21:43:18 2021] NET: Registered protocol family 16 [lun. nov. 1 21:43:18 2021] audit: initializing netlink subsys (disabled) [lun. nov. 1 21:43:18 2021] audit: type=2000 audit(1635799398.144:1): state=initialized audit_enabled=0 res=1 [lun. nov. 1 21:43:18 2021] EISA bus registered [lun. nov. 1 21:43:18 2021] cpuidle: using governor ladder [lun. nov. 1 21:43:18 2021] cpuidle: using governor menu [lun. nov. 1 21:43:18 2021] ACPI: bus type PCI registered [lun. nov. 1 21:43:18 2021] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [lun. nov. 1 21:43:18 2021] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [lun. nov. 1 21:43:18 2021] PCI: not using MMCONFIG [lun. nov. 1 21:43:18 2021] PCI: Using configuration type 1 for base access [lun. nov. 1 21:43:18 2021] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [lun. nov. 1 21:43:18 2021] ACPI: Added _OSI(Module Device) [lun. nov. 1 21:43:18 2021] ACPI: Added _OSI(Processor Device) [lun. nov. 1 21:43:18 2021] ACPI: Added _OSI(3.0 _SCP Extensions) [lun. nov. 1 21:43:18 2021] ACPI: Added _OSI(Processor Aggregator Device) [lun. nov. 1 21:43:18 2021] ACPI: Added _OSI(Linux-Dell-Video) [lun. nov. 1 21:43:18 2021] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [lun. nov. 1 21:43:18 2021] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [lun. nov. 1 21:43:18 2021] ACPI: 2 ACPI AML tables successfully acquired and loaded [lun. nov. 1 21:43:18 2021] ACPI: Dynamic OEM Table Load: [lun. nov. 1 21:43:18 2021] ACPI: SSDT 0xFFFF9BF8E70AC000 000235 (v01 HPQOEM SLIC-BPC 00000011 INTL 20051117) [lun. nov. 1 21:43:18 2021] ACPI: Dynamic OEM Table Load: [lun. nov. 1 21:43:18 2021] ACPI: SSDT 0xFFFF9BF8E70AC400 000235 (v01 HPQOEM SLIC-BPC 00000012 INTL 20051117) [lun. nov. 1 21:43:18 2021] ACPI: Interpreter enabled [lun. nov. 1 21:43:18 2021] ACPI: (supports S0 S1 S3 S4 S5) [lun. nov. 1 21:43:18 2021] ACPI: Using IOAPIC for interrupt routing [lun. nov. 1 21:43:18 2021] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [lun. nov. 1 21:43:18 2021] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [lun. nov. 1 21:43:18 2021] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [lun. nov. 1 21:43:18 2021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [lun. nov. 1 21:43:18 2021] ACPI: Enabled 12 GPEs in block 00 to 3F [lun. nov. 1 21:43:18 2021] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [lun. nov. 1 21:43:18 2021] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [lun. nov. 1 21:43:18 2021] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [lun. nov. 1 21:43:18 2021] PCI host bridge to bus 0000:00 [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: root bus resource [mem 0xcf700000-0xdfffffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: root bus resource [bus 00-ff] [lun. nov. 1 21:43:18 2021] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [lun. nov. 1 21:43:18 2021] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000 [lun. nov. 1 21:43:18 2021] pci 0000:00:02.0: reg 0x10: [mem 0xfe200000-0xfe27ffff] [lun. nov. 1 21:43:18 2021] pci 0000:00:02.0: reg 0x14: [io 0xc000-0xc007] [lun. nov. 1 21:43:18 2021] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] [lun. nov. 1 21:43:18 2021] pci 0000:00:02.0: reg 0x1c: [mem 0xfe100000-0xfe1fffff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [lun. nov. 1 21:43:18 2021] pci 0000:00:1a.0: reg 0x20: [io 0xc080-0xc09f] [lun. nov. 1 21:43:18 2021] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [lun. nov. 1 21:43:18 2021] pci 0000:00:1a.1: reg 0x20: [io 0xc400-0xc41f] [lun. nov. 1 21:43:18 2021] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [lun. nov. 1 21:43:18 2021] pci 0000:00:1a.7: reg 0x10: [mem 0xfe2ff400-0xfe2ff7ff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [lun. nov. 1 21:43:18 2021] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [lun. nov. 1 21:43:18 2021] pci 0000:00:1b.0: reg 0x10: [mem 0xfe2f8000-0xfe2fbfff 64bit] [lun. nov. 1 21:43:18 2021] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.0: reg 0x20: [io 0xc480-0xc49f] [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.1: reg 0x20: [io 0xc800-0xc81f] [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.2: reg 0x20: [io 0xc880-0xc89f] [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300 [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.3: reg 0x20: [io 0xcc00-0xcc1f] [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.7: reg 0x10: [mem 0xfe2ff800-0xfe2ffbff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100 [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018a [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.3: reg 0x10: [mem 0xfe2ffc00-0xfe2ffcff 64bit] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185 [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.5: reg 0x10: [io 0xdc00-0xdc07] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.5: reg 0x14: [io 0xd880-0xd883] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.5: reg 0x18: [io 0xd800-0xd807] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.5: reg 0x1c: [io 0xd480-0xd483] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.5: reg 0x20: [io 0xd400-0xd40f] [lun. nov. 1 21:43:18 2021] pci 0000:00:1f.5: reg 0x24: [io 0xd080-0xd08f] [lun. nov. 1 21:43:18 2021] pci 0000:04:00.0: [1b73:1100] type 00 class 0x0c0330 [lun. nov. 1 21:43:18 2021] pci 0000:04:00.0: reg 0x10: [mem 0xfeaf0000-0xfeafffff 64bit] [lun. nov. 1 21:43:18 2021] pci 0000:04:00.0: reg 0x18: [mem 0xfeaef000-0xfeaeffff 64bit] [lun. nov. 1 21:43:18 2021] pci 0000:04:00.0: reg 0x20: [mem 0xfeaee000-0xfeaeefff 64bit] [lun. nov. 1 21:43:18 2021] pci 0000:04:00.0: supports D1 [lun. nov. 1 21:43:18 2021] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [lun. nov. 1 21:43:18 2021] pci 0000:04:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: PCI bridge to [bus 04] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff] [lun. nov. 1 21:43:18 2021] pci 0000:03:00.0: [1415:c158] type 00 class 0x070002 [lun. nov. 1 21:43:18 2021] pci 0000:03:00.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff] [lun. nov. 1 21:43:18 2021] pci 0000:03:00.0: reg 0x14: [mem 0xfe600000-0xfe7fffff] [lun. nov. 1 21:43:18 2021] pci 0000:03:00.0: reg 0x18: [mem 0xfe400000-0xfe5fffff] [lun. nov. 1 21:43:18 2021] pci 0000:03:00.0: supports D1 D2 [lun. nov. 1 21:43:18 2021] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: PCI bridge to [bus 03] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: bridge window [mem 0xfe400000-0xfe9fffff] [lun. nov. 1 21:43:18 2021] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [lun. nov. 1 21:43:18 2021] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff] [lun. nov. 1 21:43:18 2021] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit] [lun. nov. 1 21:43:18 2021] pci 0000:02:00.0: reg 0x20: [mem 0xfdff0000-0xfdffffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [lun. nov. 1 21:43:18 2021] pci 0000:02:00.0: supports D1 D2 [lun. nov. 1 21:43:18 2021] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: PCI bridge to [bus 02] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci_bus 0000:01: extended config space not accessible [lun. nov. 1 21:43:18 2021] pci 0000:01:00.0: [1033:0035] type 00 class 0x0c0310 [lun. nov. 1 21:43:18 2021] pci 0000:01:00.0: reg 0x10: [mem 0xfe3fd000-0xfe3fdfff] [lun. nov. 1 21:43:18 2021] pci 0000:01:00.0: supports D1 D2 [lun. nov. 1 21:43:18 2021] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot [lun. nov. 1 21:43:18 2021] pci 0000:01:00.1: [1033:0035] type 00 class 0x0c0310 [lun. nov. 1 21:43:18 2021] pci 0000:01:00.1: reg 0x10: [mem 0xfe3fe000-0xfe3fefff] [lun. nov. 1 21:43:18 2021] pci 0000:01:00.1: supports D1 D2 [lun. nov. 1 21:43:18 2021] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot [lun. nov. 1 21:43:18 2021] pci 0000:01:00.2: [1033:00e0] type 00 class 0x0c0320 [lun. nov. 1 21:43:18 2021] pci 0000:01:00.2: reg 0x10: [mem 0xfe3ffc00-0xfe3ffcff] [lun. nov. 1 21:43:18 2021] pci 0000:01:00.2: supports D1 D2 [lun. nov. 1 21:43:18 2021] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: bridge window [mem 0xcf700000-0xdfffffff window] (subtractive decode) [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode) [lun. nov. 1 21:43:18 2021] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [lun. nov. 1 21:43:18 2021] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [lun. nov. 1 21:43:18 2021] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [lun. nov. 1 21:43:18 2021] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [lun. nov. 1 21:43:18 2021] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [lun. nov. 1 21:43:18 2021] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [lun. nov. 1 21:43:18 2021] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [lun. nov. 1 21:43:18 2021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [lun. nov. 1 21:43:18 2021] iommu: Default domain type: Translated [lun. nov. 1 21:43:18 2021] SCSI subsystem initialized [lun. nov. 1 21:43:18 2021] libata version 3.00 loaded. [lun. nov. 1 21:43:18 2021] pci 0000:00:02.0: vgaarb: setting as boot VGA device [lun. nov. 1 21:43:18 2021] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [lun. nov. 1 21:43:18 2021] pci 0000:00:02.0: vgaarb: bridge control possible [lun. nov. 1 21:43:18 2021] vgaarb: loaded [lun. nov. 1 21:43:18 2021] ACPI: bus type USB registered [lun. nov. 1 21:43:18 2021] usbcore: registered new interface driver usbfs [lun. nov. 1 21:43:18 2021] usbcore: registered new interface driver hub [lun. nov. 1 21:43:18 2021] usbcore: registered new device driver usb [lun. nov. 1 21:43:18 2021] pps_core: LinuxPPS API ver. 1 registered [lun. nov. 1 21:43:18 2021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [lun. nov. 1 21:43:18 2021] PTP clock support registered [lun. nov. 1 21:43:18 2021] EDAC MC: Ver: 3.0.0 [lun. nov. 1 21:43:18 2021] PCI: Using ACPI for IRQ routing [lun. nov. 1 21:43:18 2021] PCI: pci_cache_line_size set to 64 bytes [lun. nov. 1 21:43:18 2021] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [lun. nov. 1 21:43:18 2021] e820: reserve RAM buffer [mem 0xcf6a0000-0xcfffffff] [lun. nov. 1 21:43:18 2021] NetLabel: Initializing [lun. nov. 1 21:43:18 2021] NetLabel: domain hash size = 128 [lun. nov. 1 21:43:18 2021] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [lun. nov. 1 21:43:18 2021] NetLabel: unlabeled traffic allowed by default [lun. nov. 1 21:43:18 2021] hpet: 4 channels of 0 reserved for per-cpu timers [lun. nov. 1 21:43:18 2021] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [lun. nov. 1 21:43:18 2021] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [lun. nov. 1 21:43:18 2021] clocksource: Switched to clocksource tsc-early [lun. nov. 1 21:43:18 2021] *** VALIDATE bpf *** [lun. nov. 1 21:43:18 2021] VFS: Disk quotas dquot_6.6.0 [lun. nov. 1 21:43:18 2021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [lun. nov. 1 21:43:18 2021] *** VALIDATE ramfs *** [lun. nov. 1 21:43:18 2021] *** VALIDATE hugetlbfs *** [lun. nov. 1 21:43:18 2021] AppArmor: AppArmor Filesystem Enabled [lun. nov. 1 21:43:18 2021] pnp: PnP ACPI init [lun. nov. 1 21:43:18 2021] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [lun. nov. 1 21:43:18 2021] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [lun. nov. 1 21:43:18 2021] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [lun. nov. 1 21:43:18 2021] system 00:02: [io 0x04d0-0x04d1] has been reserved [lun. nov. 1 21:43:18 2021] system 00:02: [io 0x0800-0x087f] has been reserved [lun. nov. 1 21:43:18 2021] system 00:02: [io 0x0480-0x04bf] has been reserved [lun. nov. 1 21:43:18 2021] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [lun. nov. 1 21:43:18 2021] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved [lun. nov. 1 21:43:18 2021] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [lun. nov. 1 21:43:18 2021] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [lun. nov. 1 21:43:18 2021] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [lun. nov. 1 21:43:18 2021] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [lun. nov. 1 21:43:18 2021] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [lun. nov. 1 21:43:18 2021] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) [lun. nov. 1 21:43:18 2021] system 00:06: [io 0x0a00-0x0adf] has been reserved [lun. nov. 1 21:43:18 2021] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [lun. nov. 1 21:43:18 2021] system 00:07: [mem 0xffc00000-0xffefffff] has been reserved [lun. nov. 1 21:43:18 2021] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [lun. nov. 1 21:43:18 2021] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [lun. nov. 1 21:43:18 2021] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [lun. nov. 1 21:43:18 2021] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [lun. nov. 1 21:43:18 2021] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [lun. nov. 1 21:43:18 2021] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [lun. nov. 1 21:43:18 2021] system 00:09: [mem 0x00100000-0xcf6fffff] could not be reserved [lun. nov. 1 21:43:18 2021] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [lun. nov. 1 21:43:18 2021] pnp: PnP ACPI: found 10 devices [lun. nov. 1 21:43:18 2021] thermal_sys: Registered thermal governor 'fair_share' [lun. nov. 1 21:43:18 2021] thermal_sys: Registered thermal governor 'bang_bang' [lun. nov. 1 21:43:18 2021] thermal_sys: Registered thermal governor 'step_wise' [lun. nov. 1 21:43:18 2021] thermal_sys: Registered thermal governor 'user_space' [lun. nov. 1 21:43:18 2021] thermal_sys: Registered thermal governor 'power_allocator' [lun. nov. 1 21:43:18 2021] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: PCI bridge to [bus 04] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: PCI bridge to [bus 03] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: bridge window [mem 0xfe400000-0xfe9fffff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: PCI bridge to [bus 02] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.2: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: PCI bridge to [bus 01] [lun. nov. 1 21:43:18 2021] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: resource 8 [mem 0xcf700000-0xdfffffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [lun. nov. 1 21:43:18 2021] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff] [lun. nov. 1 21:43:18 2021] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [lun. nov. 1 21:43:18 2021] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe9fffff] [lun. nov. 1 21:43:18 2021] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [lun. nov. 1 21:43:18 2021] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [lun. nov. 1 21:43:18 2021] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [lun. nov. 1 21:43:18 2021] pci_bus 0000:01: resource 1 [mem 0xfe300000-0xfe3fffff] [lun. nov. 1 21:43:18 2021] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:01: resource 8 [mem 0xcf700000-0xdfffffff window] [lun. nov. 1 21:43:18 2021] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff window] [lun. nov. 1 21:43:18 2021] NET: Registered protocol family 2 [lun. nov. 1 21:43:18 2021] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [lun. nov. 1 21:43:18 2021] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [lun. nov. 1 21:43:18 2021] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [lun. nov. 1 21:43:18 2021] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [lun. nov. 1 21:43:18 2021] TCP: Hash tables configured (established 65536 bind 65536) [lun. nov. 1 21:43:18 2021] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [lun. nov. 1 21:43:18 2021] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [lun. nov. 1 21:43:18 2021] NET: Registered protocol family 1 [lun. nov. 1 21:43:18 2021] NET: Registered protocol family 44 [lun. nov. 1 21:43:18 2021] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [lun. nov. 1 21:43:18 2021] pci 0000:00:1c.0: enabling device (0106 -> 0107) [lun. nov. 1 21:43:18 2021] PCI: CLS 32 bytes, default 64 [lun. nov. 1 21:43:18 2021] Trying to unpack rootfs image as initramfs... [lun. nov. 1 21:43:19 2021] Freeing initrd memory: 85980K [lun. nov. 1 21:43:19 2021] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [lun. nov. 1 21:43:19 2021] software IO TLB: mapped [mem 0xcb6a0000-0xcf6a0000] (64MB) [lun. nov. 1 21:43:19 2021] check: Scanning for low memory corruption every 60 seconds [lun. nov. 1 21:43:19 2021] Initialise system trusted keyrings [lun. nov. 1 21:43:19 2021] Key type blacklist registered [lun. nov. 1 21:43:19 2021] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [lun. nov. 1 21:43:19 2021] zbud: loaded [lun. nov. 1 21:43:19 2021] squashfs: version 4.0 (2009/01/31) Phillip Lougher [lun. nov. 1 21:43:19 2021] fuse: init (API version 7.31) [lun. nov. 1 21:43:19 2021] *** VALIDATE fuse *** [lun. nov. 1 21:43:19 2021] *** VALIDATE fuse *** [lun. nov. 1 21:43:19 2021] Platform Keyring initialized [lun. nov. 1 21:43:19 2021] Key type asymmetric registered [lun. nov. 1 21:43:19 2021] Asymmetric key parser 'x509' registered [lun. nov. 1 21:43:19 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [lun. nov. 1 21:43:19 2021] io scheduler mq-deadline registered [lun. nov. 1 21:43:19 2021] pcieport 0000:00:1c.1: enabling device (0106 -> 0107) [lun. nov. 1 21:43:19 2021] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [lun. nov. 1 21:43:19 2021] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [lun. nov. 1 21:43:19 2021] vesafb: scrolling: redraw [lun. nov. 1 21:43:19 2021] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [lun. nov. 1 21:43:19 2021] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 5120k, total 5120k [lun. nov. 1 21:43:19 2021] fbcon: Deferring console take-over [lun. nov. 1 21:43:19 2021] fb0: VESA VGA frame buffer device [lun. nov. 1 21:43:19 2021] intel_idle: does not run on family 6 model 15 [lun. nov. 1 21:43:19 2021] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [lun. nov. 1 21:43:19 2021] ACPI: Power Button [PWRB] [lun. nov. 1 21:43:19 2021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [lun. nov. 1 21:43:19 2021] ACPI: Power Button [PWRF] [lun. nov. 1 21:43:19 2021] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [lun. nov. 1 21:43:19 2021] ttyS4: detected caps 00000700 should be 00000500 [lun. nov. 1 21:43:19 2021] 0000:03:00.0: ttyS4 at MMIO 0xfe9fd000 (irq = 17, base_baud = 4000000) is a 16C950/954 [lun. nov. 1 21:43:19 2021] ttyS5: detected caps 00000700 should be 00000500 [lun. nov. 1 21:43:19 2021] 0000:03:00.0: ttyS5 at MMIO 0xfe9fd200 (irq = 17, base_baud = 4000000) is a 16C950/954 [lun. nov. 1 21:43:19 2021] Linux agpgart interface v0.103 [lun. nov. 1 21:43:19 2021] loop: module loaded [lun. nov. 1 21:43:19 2021] ata_piix 0000:00:1f.2: version 2.13 [lun. nov. 1 21:43:19 2021] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [lun. nov. 1 21:43:19 2021] scsi host0: ata_piix [lun. nov. 1 21:43:19 2021] scsi host1: ata_piix [lun. nov. 1 21:43:19 2021] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [lun. nov. 1 21:43:19 2021] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [lun. nov. 1 21:43:19 2021] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [lun. nov. 1 21:43:19 2021] scsi host2: ata_piix [lun. nov. 1 21:43:19 2021] scsi host3: ata_piix [lun. nov. 1 21:43:19 2021] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19 [lun. nov. 1 21:43:19 2021] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19 [lun. nov. 1 21:43:19 2021] libphy: Fixed MDIO Bus: probed [lun. nov. 1 21:43:19 2021] tun: Universal TUN/TAP device driver, 1.6 [lun. nov. 1 21:43:19 2021] PPP generic driver version 2.4.2 [lun. nov. 1 21:43:19 2021] VFIO - User Level meta-driver version: 0.3 [lun. nov. 1 21:43:19 2021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [lun. nov. 1 21:43:19 2021] ehci-pci: EHCI PCI platform driver [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1a.7: EHCI Host Controller [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1a.7: debug port 1 [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe2ff400 [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [lun. nov. 1 21:43:19 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb1: Product: EHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb1: Manufacturer: Linux 5.4.0-88-generic ehci_hcd [lun. nov. 1 21:43:19 2021] usb usb1: SerialNumber: 0000:00:1a.7 [lun. nov. 1 21:43:19 2021] hub 1-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 1-0:1.0: 4 ports detected [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1d.7: EHCI Host Controller [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1d.7: debug port 1 [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe2ff800 [lun. nov. 1 21:43:19 2021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [lun. nov. 1 21:43:19 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb2: Product: EHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb2: Manufacturer: Linux 5.4.0-88-generic ehci_hcd [lun. nov. 1 21:43:19 2021] usb usb2: SerialNumber: 0000:00:1d.7 [lun. nov. 1 21:43:19 2021] hub 2-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 2-0:1.0: 8 ports detected [lun. nov. 1 21:43:19 2021] ehci-pci 0000:01:00.2: EHCI Host Controller [lun. nov. 1 21:43:19 2021] ehci-pci 0000:01:00.2: new USB bus registered, assigned bus number 3 [lun. nov. 1 21:43:19 2021] ehci-pci 0000:01:00.2: irq 19, io mem 0xfe3ffc00 [lun. nov. 1 21:43:19 2021] ehci-pci 0000:01:00.2: USB 2.0 started, EHCI 1.00 [lun. nov. 1 21:43:19 2021] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb3: Product: EHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb3: Manufacturer: Linux 5.4.0-88-generic ehci_hcd [lun. nov. 1 21:43:19 2021] usb usb3: SerialNumber: 0000:01:00.2 [lun. nov. 1 21:43:19 2021] hub 3-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 3-0:1.0: 5 ports detected [lun. nov. 1 21:43:19 2021] ehci-platform: EHCI generic platform driver [lun. nov. 1 21:43:19 2021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [lun. nov. 1 21:43:19 2021] ohci-pci: OHCI PCI platform driver [lun. nov. 1 21:43:19 2021] ohci-pci 0000:01:00.0: OHCI PCI host controller [lun. nov. 1 21:43:19 2021] ohci-pci 0000:01:00.0: new USB bus registered, assigned bus number 4 [lun. nov. 1 21:43:19 2021] ohci-pci 0000:01:00.0: irq 17, io mem 0xfe3fd000 [lun. nov. 1 21:43:19 2021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb4: Product: OHCI PCI host controller [lun. nov. 1 21:43:19 2021] usb usb4: Manufacturer: Linux 5.4.0-88-generic ohci_hcd [lun. nov. 1 21:43:19 2021] usb usb4: SerialNumber: 0000:01:00.0 [lun. nov. 1 21:43:19 2021] hub 4-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 4-0:1.0: 3 ports detected [lun. nov. 1 21:43:19 2021] ohci-pci 0000:01:00.1: OHCI PCI host controller [lun. nov. 1 21:43:19 2021] ohci-pci 0000:01:00.1: new USB bus registered, assigned bus number 5 [lun. nov. 1 21:43:19 2021] ohci-pci 0000:01:00.1: irq 18, io mem 0xfe3fe000 [lun. nov. 1 21:43:19 2021] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb5: Product: OHCI PCI host controller [lun. nov. 1 21:43:19 2021] usb usb5: Manufacturer: Linux 5.4.0-88-generic ohci_hcd [lun. nov. 1 21:43:19 2021] usb usb5: SerialNumber: 0000:01:00.1 [lun. nov. 1 21:43:19 2021] hub 5-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 5-0:1.0: 2 ports detected [lun. nov. 1 21:43:19 2021] ohci-platform: OHCI generic platform driver [lun. nov. 1 21:43:19 2021] uhci_hcd: USB Universal Host Controller Interface driver [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1a.0: UHCI Host Controller [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 6 [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1a.0: detected 2 ports [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c080 [lun. nov. 1 21:43:19 2021] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb6: Product: UHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb6: Manufacturer: Linux 5.4.0-88-generic uhci_hcd [lun. nov. 1 21:43:19 2021] usb usb6: SerialNumber: 0000:00:1a.0 [lun. nov. 1 21:43:19 2021] hub 6-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 6-0:1.0: 2 ports detected [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1a.1: UHCI Host Controller [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 7 [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1a.1: detected 2 ports [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400 [lun. nov. 1 21:43:19 2021] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb7: Product: UHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb7: Manufacturer: Linux 5.4.0-88-generic uhci_hcd [lun. nov. 1 21:43:19 2021] usb usb7: SerialNumber: 0000:00:1a.1 [lun. nov. 1 21:43:19 2021] hub 7-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 7-0:1.0: 2 ports detected [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.0: UHCI Host Controller [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8 [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.0: detected 2 ports [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480 [lun. nov. 1 21:43:19 2021] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb8: Product: UHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb8: Manufacturer: Linux 5.4.0-88-generic uhci_hcd [lun. nov. 1 21:43:19 2021] usb usb8: SerialNumber: 0000:00:1d.0 [lun. nov. 1 21:43:19 2021] hub 8-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 8-0:1.0: 2 ports detected [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.1: UHCI Host Controller [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9 [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.1: detected 2 ports [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800 [lun. nov. 1 21:43:19 2021] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb9: Product: UHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb9: Manufacturer: Linux 5.4.0-88-generic uhci_hcd [lun. nov. 1 21:43:19 2021] usb usb9: SerialNumber: 0000:00:1d.1 [lun. nov. 1 21:43:19 2021] hub 9-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 9-0:1.0: 2 ports detected [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.2: UHCI Host Controller [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10 [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.2: detected 2 ports [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880 [lun. nov. 1 21:43:19 2021] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb10: Product: UHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb10: Manufacturer: Linux 5.4.0-88-generic uhci_hcd [lun. nov. 1 21:43:19 2021] usb usb10: SerialNumber: 0000:00:1d.2 [lun. nov. 1 21:43:19 2021] hub 10-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 10-0:1.0: 2 ports detected [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.3: UHCI Host Controller [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 11 [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.3: detected 2 ports [lun. nov. 1 21:43:19 2021] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00 [lun. nov. 1 21:43:19 2021] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb11: Product: UHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb11: Manufacturer: Linux 5.4.0-88-generic uhci_hcd [lun. nov. 1 21:43:19 2021] usb usb11: SerialNumber: 0000:00:1d.3 [lun. nov. 1 21:43:19 2021] hub 11-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 11-0:1.0: 2 ports detected [lun. nov. 1 21:43:19 2021] xhci_hcd 0000:04:00.0: xHCI Host Controller [lun. nov. 1 21:43:19 2021] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 12 [lun. nov. 1 21:43:19 2021] xhci_hcd 0000:04:00.0: hcc params 0x200071e1 hci version 0x100 quirks 0x0000000000000010 [lun. nov. 1 21:43:19 2021] usb usb12: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb12: Product: xHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb12: Manufacturer: Linux 5.4.0-88-generic xhci-hcd [lun. nov. 1 21:43:19 2021] usb usb12: SerialNumber: 0000:04:00.0 [lun. nov. 1 21:43:19 2021] hub 12-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 12-0:1.0: 4 ports detected [lun. nov. 1 21:43:19 2021] xhci_hcd 0000:04:00.0: xHCI Host Controller [lun. nov. 1 21:43:19 2021] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 13 [lun. nov. 1 21:43:19 2021] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [lun. nov. 1 21:43:19 2021] usb usb13: We don't know the algorithms for LPM for this host, disabling LPM. [lun. nov. 1 21:43:19 2021] usb usb13: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [lun. nov. 1 21:43:19 2021] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [lun. nov. 1 21:43:19 2021] usb usb13: Product: xHCI Host Controller [lun. nov. 1 21:43:19 2021] usb usb13: Manufacturer: Linux 5.4.0-88-generic xhci-hcd [lun. nov. 1 21:43:19 2021] usb usb13: SerialNumber: 0000:04:00.0 [lun. nov. 1 21:43:19 2021] hub 13-0:1.0: USB hub found [lun. nov. 1 21:43:19 2021] hub 13-0:1.0: 4 ports detected [lun. nov. 1 21:43:19 2021] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [lun. nov. 1 21:43:19 2021] serio: i8042 KBD port at 0x60,0x64 irq 1 [lun. nov. 1 21:43:19 2021] serio: i8042 AUX port at 0x60,0x64 irq 12 [lun. nov. 1 21:43:19 2021] mousedev: PS/2 mouse device common for all mice [lun. nov. 1 21:43:19 2021] rtc_cmos 00:01: RTC can wake from S4 [lun. nov. 1 21:43:19 2021] rtc_cmos 00:01: registered as rtc0 [lun. nov. 1 21:43:19 2021] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [lun. nov. 1 21:43:19 2021] i2c /dev entries driver [lun. nov. 1 21:43:19 2021] device-mapper: uevent: version 1.0.3 [lun. nov. 1 21:43:19 2021] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [lun. nov. 1 21:43:19 2021] platform eisa.0: Probing EISA bus 0 [lun. nov. 1 21:43:19 2021] platform eisa.0: EISA: Cannot allocate resource for mainboard [lun. nov. 1 21:43:19 2021] platform eisa.0: Cannot allocate resource for EISA slot 1 [lun. nov. 1 21:43:19 2021] platform eisa.0: Cannot allocate resource for EISA slot 2 [lun. nov. 1 21:43:19 2021] platform eisa.0: Cannot allocate resource for EISA slot 3 [lun. nov. 1 21:43:19 2021] platform eisa.0: Cannot allocate resource for EISA slot 4 [lun. nov. 1 21:43:19 2021] platform eisa.0: Cannot allocate resource for EISA slot 5 [lun. nov. 1 21:43:19 2021] platform eisa.0: Cannot allocate resource for EISA slot 6 [lun. nov. 1 21:43:19 2021] platform eisa.0: Cannot allocate resource for EISA slot 7 [lun. nov. 1 21:43:19 2021] platform eisa.0: Cannot allocate resource for EISA slot 8 [lun. nov. 1 21:43:19 2021] platform eisa.0: EISA: Detected 0 cards [lun. nov. 1 21:43:19 2021] intel_pstate: CPU model not supported [lun. nov. 1 21:43:19 2021] ledtrig-cpu: registered to indicate activity on CPUs [lun. nov. 1 21:43:19 2021] drop_monitor: Initializing network drop monitor service [lun. nov. 1 21:43:19 2021] NET: Registered protocol family 10 [lun. nov. 1 21:43:19 2021] Segment Routing with IPv6 [lun. nov. 1 21:43:19 2021] NET: Registered protocol family 17 [lun. nov. 1 21:43:19 2021] Key type dns_resolver registered [lun. nov. 1 21:43:19 2021] RAS: Correctable Errors collector initialized. [lun. nov. 1 21:43:19 2021] microcode: sig=0x6fd, pf=0x1, revision=0xa4 [lun. nov. 1 21:43:19 2021] microcode: Microcode Update Driver: v2.2. [lun. nov. 1 21:43:19 2021] IPI shorthand broadcast: enabled [lun. nov. 1 21:43:19 2021] sched_clock: Marking stable (1481681532, 295804)->(1504512822, -22535486) [lun. nov. 1 21:43:19 2021] registered taskstats version 1 [lun. nov. 1 21:43:19 2021] Loading compiled-in X.509 certificates [lun. nov. 1 21:43:19 2021] Loaded X.509 cert 'Build time autogenerated kernel key: 92f0bd9ca5683f6b296baf0cd33861a222c877ca' [lun. nov. 1 21:43:19 2021] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [lun. nov. 1 21:43:19 2021] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [lun. nov. 1 21:43:19 2021] zswap: loaded using pool lzo/zbud [lun. nov. 1 21:43:19 2021] Key type ._fscrypt registered [lun. nov. 1 21:43:19 2021] Key type .fscrypt registered [lun. nov. 1 21:43:19 2021] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [lun. nov. 1 21:43:19 2021] Key type big_key registered [lun. nov. 1 21:43:19 2021] Key type encrypted registered [lun. nov. 1 21:43:19 2021] AppArmor: AppArmor sha1 policy hashing enabled [lun. nov. 1 21:43:19 2021] ima: No TPM chip found, activating TPM-bypass! [lun. nov. 1 21:43:19 2021] ima: Allocated hash algorithm: sha1 [lun. nov. 1 21:43:19 2021] ima: No architecture policies found [lun. nov. 1 21:43:19 2021] evm: Initialising EVM extended attributes: [lun. nov. 1 21:43:19 2021] evm: security.selinux [lun. nov. 1 21:43:19 2021] evm: security.SMACK64 [lun. nov. 1 21:43:19 2021] evm: security.SMACK64EXEC [lun. nov. 1 21:43:19 2021] evm: security.SMACK64TRANSMUTE [lun. nov. 1 21:43:19 2021] evm: security.SMACK64MMAP [lun. nov. 1 21:43:19 2021] evm: security.apparmor [lun. nov. 1 21:43:19 2021] evm: security.ima [lun. nov. 1 21:43:19 2021] evm: security.capability [lun. nov. 1 21:43:19 2021] evm: HMAC attrs: 0x1 [lun. nov. 1 21:43:19 2021] PM: Magic number: 13:910:749 [lun. nov. 1 21:43:19 2021] tty ttyS0: hash matches [lun. nov. 1 21:43:19 2021] rtc_cmos 00:01: setting system clock to 2021-11-01T20:43:20 UTC (1635799400) [lun. nov. 1 21:43:19 2021] ata3: SATA link down (SStatus 0 SControl 300) [lun. nov. 1 21:43:19 2021] ata4: SATA link down (SStatus 0 SControl 300) [lun. nov. 1 21:43:19 2021] usb 12-1: new full-speed USB device number 2 using xhci_hcd [lun. nov. 1 21:43:19 2021] usb 4-3: new low-speed USB device number 2 using ohci-pci [lun. nov. 1 21:43:19 2021] usb 12-1: New USB device found, idVendor=04a9, idProduct=220e, bcdDevice= 1.00 [lun. nov. 1 21:43:19 2021] usb 12-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [lun. nov. 1 21:43:19 2021] usb 12-1: Product: CanoScan [lun. nov. 1 21:43:19 2021] usb 12-1: Manufacturer: Canon [lun. nov. 1 21:43:20 2021] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [lun. nov. 1 21:43:20 2021] ata1.01: SATA link down (SStatus 0 SControl 300) [lun. nov. 1 21:43:20 2021] ata1.00: ATA-7: ST3250310AS, 3.AHC, max UDMA/100 [lun. nov. 1 21:43:20 2021] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [lun. nov. 1 21:43:20 2021] ata1.00: configured for UDMA/100 [lun. nov. 1 21:43:20 2021] scsi 0:0:0:0: Direct-Access ATA ST3250310AS C PQ: 0 ANSI: 5 [lun. nov. 1 21:43:20 2021] sd 0:0:0:0: Attached scsi generic sg0 type 0 [lun. nov. 1 21:43:20 2021] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [lun. nov. 1 21:43:20 2021] sd 0:0:0:0: [sda] Write Protect is off [lun. nov. 1 21:43:20 2021] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [lun. nov. 1 21:43:20 2021] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [lun. nov. 1 21:43:20 2021] sda: sda1 sda2 < sda5 > [lun. nov. 1 21:43:20 2021] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [lun. nov. 1 21:43:20 2021] ata2.01: SATA link down (SStatus 0 SControl 300) [lun. nov. 1 21:43:20 2021] ata2.01: link offline, clearing class 3 to NONE [lun. nov. 1 21:43:20 2021] sd 0:0:0:0: [sda] Attached SCSI disk [lun. nov. 1 21:43:20 2021] ata2.00: ATAPI: HL-DT-ST DVD-RAM GH15L, RA02, max UDMA/100 [lun. nov. 1 21:43:20 2021] ata2.00: configured for UDMA/100 [lun. nov. 1 21:43:20 2021] usb 4-3: New USB device found, idVendor=04f2, idProduct=0939, bcdDevice= 1.00 [lun. nov. 1 21:43:20 2021] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [lun. nov. 1 21:43:20 2021] usb 4-3: Product: USB Optical Mouse [lun. nov. 1 21:43:20 2021] usb 4-3: Manufacturer: PixArt [lun. nov. 1 21:43:20 2021] tsc: Refined TSC clocksource calibration: 1999.959 MHz [lun. nov. 1 21:43:20 2021] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a80f81bd3, max_idle_ns: 881590787216 ns [lun. nov. 1 21:43:20 2021] clocksource: Switched to clocksource tsc [lun. nov. 1 21:43:20 2021] usb 13-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [lun. nov. 1 21:43:20 2021] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH15L RA02 PQ: 0 ANSI: 5 [lun. nov. 1 21:43:20 2021] usb 13-4: New USB device found, idVendor=05e3, idProduct=0732, bcdDevice= 5.47 [lun. nov. 1 21:43:20 2021] usb 13-4: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [lun. nov. 1 21:43:20 2021] usb 13-4: Product: USB Storage [lun. nov. 1 21:43:20 2021] usb 13-4: SerialNumber: 000000000547 [lun. nov. 1 21:43:20 2021] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [lun. nov. 1 21:43:20 2021] cdrom: Uniform CD-ROM driver Revision: 3.20 [lun. nov. 1 21:43:20 2021] sr 1:0:0:0: Attached scsi CD-ROM sr0 [lun. nov. 1 21:43:20 2021] sr 1:0:0:0: Attached scsi generic sg1 type 5 [lun. nov. 1 21:43:20 2021] Freeing unused decrypted memory: 2040K [lun. nov. 1 21:43:20 2021] Freeing unused kernel image memory: 2728K [lun. nov. 1 21:43:20 2021] Write protecting the kernel read-only data: 22528k [lun. nov. 1 21:43:20 2021] Freeing unused kernel image memory: 2008K [lun. nov. 1 21:43:20 2021] Freeing unused kernel image memory: 1128K [lun. nov. 1 21:43:20 2021] x86/mm: Checked W+X mappings: passed, no W+X pages found. [lun. nov. 1 21:43:20 2021] x86/mm: Checking user space page tables [lun. nov. 1 21:43:20 2021] x86/mm: Checked W+X mappings: passed, no W+X pages found. [lun. nov. 1 21:43:20 2021] Run /init as init process [lun. nov. 1 21:43:20 2021] usb-storage 13-4:1.0: USB Mass Storage device detected [lun. nov. 1 21:43:20 2021] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [lun. nov. 1 21:43:20 2021] scsi host4: usb-storage 13-4:1.0 [lun. nov. 1 21:43:20 2021] usbcore: registered new interface driver usb-storage [lun. nov. 1 21:43:20 2021] usbcore: registered new interface driver uas [lun. nov. 1 21:43:20 2021] hidraw: raw HID events driver (C) Jiri Kosina [lun. nov. 1 21:43:20 2021] libphy: r8169: probed [lun. nov. 1 21:43:20 2021] r8169 0000:02:00.0 eth0: RTL8168c/8111c, 00:22:64:bd:95:b7, XID 3c4, IRQ 30 [lun. nov. 1 21:43:20 2021] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [lun. nov. 1 21:43:20 2021] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20190816/utaddress-204) [lun. nov. 1 21:43:20 2021] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [lun. nov. 1 21:43:20 2021] lpc_ich: Resource conflict(s) found affecting gpio_ich [lun. nov. 1 21:43:20 2021] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [lun. nov. 1 21:43:20 2021] usbcore: registered new interface driver usbhid [lun. nov. 1 21:43:20 2021] usbhid: USB HID core driver [lun. nov. 1 21:43:20 2021] pci 0000:00:00.0: Intel G33 Chipset [lun. nov. 1 21:43:20 2021] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [lun. nov. 1 21:43:20 2021] pci 0000:00:00.0: detected 8192K stolen memory [lun. nov. 1 21:43:20 2021] checking generic (d0000000 500000) vs hw (d0000000 10000000) [lun. nov. 1 21:43:20 2021] fb0: switching to inteldrmfb from VESA VGA [lun. nov. 1 21:43:20 2021] i915 0000:00:02.0: vgaarb: deactivate vga console [lun. nov. 1 21:43:20 2021] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [lun. nov. 1 21:43:20 2021] [drm] Driver supports precise vblank timestamp query. [lun. nov. 1 21:43:20 2021] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [lun. nov. 1 21:43:20 2021] [drm] RC6 disabled, disabling runtime PM support [lun. nov. 1 21:43:20 2021] [drm] Initialized overlay support. [lun. nov. 1 21:43:20 2021] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [lun. nov. 1 21:43:20 2021] r8169 0000:02:00.0 enp2s0: renamed from eth0 [lun. nov. 1 21:43:20 2021] gpio_ich gpio_ich.2.auto: GPIO from 451 to 511 [lun. nov. 1 21:43:20 2021] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1e.0/0000:01:00.0/usb4/4-3/4-3:1.0/0003:04F2:0939.0001/input/input5 [lun. nov. 1 21:43:20 2021] hid-generic 0003:04F2:0939.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:01:00.0-3/input0 [lun. nov. 1 21:43:20 2021] fbcon: i915drmfb (fb0) is primary device [lun. nov. 1 21:43:20 2021] fbcon: Deferring console take-over [lun. nov. 1 21:43:20 2021] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [lun. nov. 1 21:43:21 2021] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0547 PQ: 0 ANSI: 0 [lun. nov. 1 21:43:21 2021] scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 0547 PQ: 0 ANSI: 0 [lun. nov. 1 21:43:21 2021] scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 0547 PQ: 0 ANSI: 0 [lun. nov. 1 21:43:21 2021] random: fast init done [lun. nov. 1 21:43:21 2021] scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 0547 PQ: 0 ANSI: 0 [lun. nov. 1 21:43:21 2021] scsi 4:0:0:4: Direct-Access Generic STORAGE DEVICE 0547 PQ: 0 ANSI: 0 [lun. nov. 1 21:43:21 2021] random: systemd-udevd: uninitialized urandom read (16 bytes read) [lun. nov. 1 21:43:21 2021] random: systemd-udevd: uninitialized urandom read (16 bytes read) [lun. nov. 1 21:43:21 2021] sd 4:0:0:0: Attached scsi generic sg2 type 0 [lun. nov. 1 21:43:21 2021] random: systemd-udevd: uninitialized urandom read (16 bytes read) [lun. nov. 1 21:43:21 2021] sd 4:0:0:1: Attached scsi generic sg3 type 0 [lun. nov. 1 21:43:21 2021] sd 4:0:0:2: Attached scsi generic sg4 type 0 [lun. nov. 1 21:43:21 2021] sd 4:0:0:3: Attached scsi generic sg5 type 0 [lun. nov. 1 21:43:21 2021] sd 4:0:0:4: Attached scsi generic sg6 type 0 [lun. nov. 1 21:43:21 2021] sd 4:0:0:4: [sdf] Attached SCSI removable disk [lun. nov. 1 21:43:21 2021] sd 4:0:0:1: [sdc] Attached SCSI removable disk [lun. nov. 1 21:43:21 2021] sd 4:0:0:3: [sde] Attached SCSI removable disk [lun. nov. 1 21:43:21 2021] sd 4:0:0:2: [sdd] Attached SCSI removable disk [lun. nov. 1 21:43:21 2021] sd 4:0:0:0: [sdb] Attached SCSI removable disk [lun. nov. 1 21:43:22 2021] raid6: sse2x4 gen() 6035 MB/s [lun. nov. 1 21:43:22 2021] raid6: sse2x4 xor() 4376 MB/s [lun. nov. 1 21:43:22 2021] raid6: sse2x2 gen() 3504 MB/s [lun. nov. 1 21:43:22 2021] raid6: sse2x2 xor() 4100 MB/s [lun. nov. 1 21:43:22 2021] raid6: sse2x1 gen() 3081 MB/s [lun. nov. 1 21:43:22 2021] raid6: sse2x1 xor() 3331 MB/s [lun. nov. 1 21:43:22 2021] raid6: using algorithm sse2x4 gen() 6035 MB/s [lun. nov. 1 21:43:22 2021] raid6: .... xor() 4376 MB/s, rmw enabled [lun. nov. 1 21:43:22 2021] raid6: using ssse3x2 recovery algorithm [lun. nov. 1 21:43:22 2021] xor: measuring software checksum speed [lun. nov. 1 21:43:22 2021] prefetch64-sse: 9429.000 MB/sec [lun. nov. 1 21:43:22 2021] generic_sse: 8184.000 MB/sec [lun. nov. 1 21:43:22 2021] xor: using function: prefetch64-sse (9429.000 MB/sec) [lun. nov. 1 21:43:22 2021] Btrfs loaded, crc32c=crc32c-generic [lun. nov. 1 21:43:23 2021] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [lun. nov. 1 21:43:24 2021] random: crng init done [lun. nov. 1 21:43:24 2021] random: 7 urandom warning(s) missed due to ratelimiting [lun. nov. 1 21:43:25 2021] systemd[1]: Inserted module 'autofs4' [lun. nov. 1 21:43:25 2021] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [lun. nov. 1 21:43:25 2021] systemd[1]: Detected architecture x86-64. [lun. nov. 1 21:43:25 2021] systemd[1]: Set hostname to <rick>. [lun. nov. 1 21:43:30 2021] systemd[1]: Created slice system-modprobe.slice. [lun. nov. 1 21:43:30 2021] systemd[1]: Created slice system-systemd\x2dfsck.slice. [lun. nov. 1 21:43:30 2021] systemd[1]: Created slice User and Session Slice. [lun. nov. 1 21:43:30 2021] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [lun. nov. 1 21:43:30 2021] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [lun. nov. 1 21:43:30 2021] systemd[1]: Reached target User and Group Name Lookups. [lun. nov. 1 21:43:30 2021] systemd[1]: Reached target Remote File Systems. [lun. nov. 1 21:43:30 2021] systemd[1]: Reached target Slices. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on Device-mapper event daemon FIFOs. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on LVM2 poll daemon socket. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on Syslog Socket. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on Process Core Dump Socket. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on fsck to fsckd communication Socket. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on initctl Compatibility Named Pipe. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on Journal Audit Socket. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on Journal Socket (/dev/log). [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on Journal Socket. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on udev Control Socket. [lun. nov. 1 21:43:30 2021] systemd[1]: Listening on udev Kernel Socket. [lun. nov. 1 21:43:30 2021] systemd[1]: Mounting Huge Pages File System... [lun. nov. 1 21:43:30 2021] systemd[1]: Mounting POSIX Message Queue File System... [lun. nov. 1 21:43:30 2021] systemd[1]: Mounting Kernel Debug File System... [lun. nov. 1 21:43:30 2021] systemd[1]: Mounting Kernel Trace File System... [lun. nov. 1 21:43:30 2021] systemd[1]: Starting Journal Service... [lun. nov. 1 21:43:30 2021] systemd[1]: Starting Availability of block devices... [lun. nov. 1 21:43:30 2021] systemd[1]: Starting Set the console keyboard layout... [lun. nov. 1 21:43:30 2021] systemd[1]: Starting Create list of static device nodes for the current kernel... [lun. nov. 1 21:43:30 2021] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [lun. nov. 1 21:43:30 2021] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [lun. nov. 1 21:43:30 2021] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [lun. nov. 1 21:43:30 2021] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [lun. nov. 1 21:43:30 2021] systemd[1]: Starting Load Kernel Modules... [lun. nov. 1 21:43:30 2021] systemd[1]: Starting Remount Root and Kernel File Systems... [lun. nov. 1 21:43:30 2021] systemd[1]: Starting udev Coldplug all Devices... [lun. nov. 1 21:43:30 2021] systemd[1]: Starting Uncomplicated firewall... [lun. nov. 1 21:43:30 2021] systemd[1]: Mounted Huge Pages File System. [lun. nov. 1 21:43:30 2021] systemd[1]: Mounted POSIX Message Queue File System. [lun. nov. 1 21:43:30 2021] systemd[1]: Mounted Kernel Debug File System. [lun. nov. 1 21:43:30 2021] systemd[1]: Mounted Kernel Trace File System. [lun. nov. 1 21:43:30 2021] systemd[1]: Finished Availability of block devices. [lun. nov. 1 21:43:30 2021] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [lun. nov. 1 21:43:30 2021] systemd[1]: Finished Create list of static device nodes for the current kernel. [lun. nov. 1 21:43:30 2021] systemd[1]: Started Journal Service. [lun. nov. 1 21:43:30 2021] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [lun. nov. 1 21:43:31 2021] systemd-journald[292]: Received client request to flush runtime journal. [lun. nov. 1 21:43:31 2021] lp: driver loaded but no devices found [lun. nov. 1 21:43:31 2021] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [lun. nov. 1 21:43:31 2021] ppdev: user-space parallel port driver [lun. nov. 1 21:43:40 2021] coretemp coretemp.0: Using relative temperature scale! [lun. nov. 1 21:43:40 2021] coretemp coretemp.0: Using relative temperature scale! [lun. nov. 1 21:43:40 2021] intel_powerclamp: No package C-state available [lun. nov. 1 21:43:40 2021] intel_powerclamp: No package C-state available [lun. nov. 1 21:43:42 2021] snd_hda_codec_realtek hdaudioC0D0: ALC1200: SKU not ready 0x411111f0 [lun. nov. 1 21:43:42 2021] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [lun. nov. 1 21:43:42 2021] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [lun. nov. 1 21:43:42 2021] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [lun. nov. 1 21:43:42 2021] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [lun. nov. 1 21:43:42 2021] snd_hda_codec_realtek hdaudioC0D0: inputs: [lun. nov. 1 21:43:42 2021] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [lun. nov. 1 21:43:42 2021] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [lun. nov. 1 21:43:42 2021] snd_hda_codec_realtek hdaudioC0D0: Line=0x16 [lun. nov. 1 21:43:42 2021] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [lun. nov. 1 21:43:42 2021] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [lun. nov. 1 21:43:42 2021] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [lun. nov. 1 21:43:42 2021] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [lun. nov. 1 21:43:42 2021] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [lun. nov. 1 21:43:47 2021] audit: type=1400 audit(1635799428.657:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=504 comm="apparmor_parser" [lun. nov. 1 21:43:47 2021] audit: type=1400 audit(1635799428.693:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=507 comm="apparmor_parser" [lun. nov. 1 21:43:47 2021] audit: type=1400 audit(1635799428.853:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=511 comm="apparmor_parser" [lun. nov. 1 21:43:47 2021] audit: type=1400 audit(1635799428.877:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=506 comm="apparmor_parser" [lun. nov. 1 21:43:47 2021] audit: type=1400 audit(1635799428.877:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=506 comm="apparmor_parser" [lun. nov. 1 21:43:48 2021] audit: type=1400 audit(1635799429.017:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=513 comm="apparmor_parser" [lun. nov. 1 21:43:48 2021] audit: type=1400 audit(1635799429.053:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=512 comm="apparmor_parser" [lun. nov. 1 21:43:48 2021] audit: type=1400 audit(1635799429.053:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=512 comm="apparmor_parser" [lun. nov. 1 21:43:48 2021] audit: type=1400 audit(1635799429.053:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=512 comm="apparmor_parser" [lun. nov. 1 21:43:48 2021] audit: type=1400 audit(1635799429.145:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=514 comm="apparmor_parser" [lun. nov. 1 21:44:09 2021] RTL8211B Gigabit Ethernet r8169-0-200:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-200:00, irq=IGNORE) [lun. nov. 1 21:44:09 2021] r8169 0000:02:00.0 enp2s0: Link is Down [lun. nov. 1 21:44:13 2021] kauditd_printk_skb: 13 callbacks suppressed [lun. nov. 1 21:44:13 2021] audit: type=1400 audit(1635799454.901:25): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=685 comm="cups-browsed" capability=23 capname="sys_nice" [lun. nov. 1 21:44:19 2021] fbcon: Taking over console [lun. nov. 1 21:44:19 2021] Console: switching to colour frame buffer device 160x64 [lun. nov. 1 21:44:57 2021] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx [lun. nov. 1 21:44:57 2021] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [lun. nov. 1 21:47:14 2021] perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [lun. nov. 1 21:47:38 2021] perf: interrupt took too long (3150 > 3142), lowering kernel.perf_event_max_sample_rate to 63500 [lun. nov. 1 21:48:18 2021] perf: interrupt took too long (3964 > 3937), lowering kernel.perf_event_max_sample_rate to 50250 [lun. nov. 1 21:49:25 2021] perf: interrupt took too long (4984 > 4955), lowering kernel.perf_event_max_sample_rate to 40000 [lun. nov. 1 21:51:30 2021] perf: interrupt took too long (6267 > 6230), lowering kernel.perf_event_max_sample_rate to 31750 [lun. nov. 1 21:56:50 2021] usb 12-3: new high-speed USB device number 3 using xhci_hcd [lun. nov. 1 21:56:51 2021] usb 12-3: New USB device found, idVendor=05dc, idProduct=c75c, bcdDevice= 1.02 [lun. nov. 1 21:56:51 2021] usb 12-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [lun. nov. 1 21:56:51 2021] usb 12-3: Product: USB Flash Drive [lun. nov. 1 21:56:51 2021] usb 12-3: Manufacturer: Lexar [lun. nov. 1 21:56:51 2021] usb 12-3: SerialNumber: 20130614012518703481 [lun. nov. 1 21:56:51 2021] usb-storage 12-3:1.0: USB Mass Storage device detected [lun. nov. 1 21:56:51 2021] scsi host5: usb-storage 12-3:1.0 [lun. nov. 1 21:56:53 2021] scsi 5:0:0:0: Direct-Access Lexar USB Flash Drive 8.07 PQ: 0 ANSI: 4 [lun. nov. 1 21:56:53 2021] sd 5:0:0:0: Attached scsi generic sg7 type 0 [lun. nov. 1 21:56:53 2021] sd 5:0:0:0: [sdg] 61288448 512-byte logical blocks: (31.4 GB/29.2 GiB) [lun. nov. 1 21:56:53 2021] sd 5:0:0:0: [sdg] Write Protect is off [lun. nov. 1 21:56:53 2021] sd 5:0:0:0: [sdg] Mode Sense: 23 00 00 00 [lun. nov. 1 21:56:53 2021] sd 5:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [lun. nov. 1 21:56:53 2021] sdg: sdg1 sdg2 sdg3 [lun. nov. 1 21:56:53 2021] sd 5:0:0:0: [sdg] Attached SCSI removable disk [lun. nov. 1 21:56:53 2021] ISO 9660 Extensions: Microsoft Joliet Level 3 [lun. nov. 1 21:56:53 2021] ISO 9660 Extensions: Microsoft Joliet Level 3 [lun. nov. 1 21:56:53 2021] ISO 9660 Extensions: RRIP_1991A [lun. nov. 1 21:56:59 2021] EXT4-fs (sdg3): recovery complete [lun. nov. 1 21:56:59 2021] EXT4-fs (sdg3): mounted filesystem with ordered data mode. Opts: (null) [lun. nov. 1 21:57:32 2021] usb 12-3: USB disconnect, device number 3 [lun. nov. 1 21:57:51 2021] usb 12-3: new high-speed USB device number 4 using xhci_hcd [lun. nov. 1 21:57:52 2021] usb 12-3: New USB device found, idVendor=0930, idProduct=6544, bcdDevice= 1.00 [lun. nov. 1 21:57:52 2021] usb 12-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [lun. nov. 1 21:57:52 2021] usb 12-3: Product: TransMemory [lun. nov. 1 21:57:52 2021] usb 12-3: Manufacturer: TOSHIBA [lun. nov. 1 21:57:52 2021] usb 12-3: SerialNumber: FCAED3E59A6BCD40D55CAD68 [lun. nov. 1 21:57:52 2021] usb-storage 12-3:1.0: USB Mass Storage device detected [lun. nov. 1 21:57:52 2021] scsi host5: usb-storage 12-3:1.0 [lun. nov. 1 21:57:53 2021] scsi 5:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4 [lun. nov. 1 21:57:53 2021] sd 5:0:0:0: Attached scsi generic sg7 type 0 [lun. nov. 1 21:57:53 2021] sd 5:0:0:0: [sdg] 60594432 512-byte logical blocks: (31.0 GB/28.9 GiB) [lun. nov. 1 21:57:53 2021] sd 5:0:0:0: [sdg] Write Protect is off [lun. nov. 1 21:57:53 2021] sd 5:0:0:0: [sdg] Mode Sense: 45 00 00 00 [lun. nov. 1 21:57:53 2021] sd 5:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [lun. nov. 1 21:57:53 2021] sdg: sdg1 [lun. nov. 1 21:57:53 2021] sd 5:0:0:0: [sdg] Attached SCSI removable disk [lun. nov. 1 21:58:12 2021] sdg: [lun. nov. 1 21:58:12 2021] sdg: sdg1 [lun. nov. 1 21:58:21 2021] usb 12-3: USB disconnect, device number 4 [lun. nov. 1 21:58:27 2021] usb 12-3: new high-speed USB device number 5 using xhci_hcd [lun. nov. 1 21:58:27 2021] usb 12-3: New USB device found, idVendor=0930, idProduct=6544, bcdDevice= 1.00 [lun. nov. 1 21:58:27 2021] usb 12-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [lun. nov. 1 21:58:27 2021] usb 12-3: Product: TransMemory [lun. nov. 1 21:58:27 2021] usb 12-3: Manufacturer: TOSHIBA [lun. nov. 1 21:58:27 2021] usb 12-3: SerialNumber: FCAED3E59A6BCD40D55CAD68 [lun. nov. 1 21:58:27 2021] usb-storage 12-3:1.0: USB Mass Storage device detected [lun. nov. 1 21:58:27 2021] scsi host5: usb-storage 12-3:1.0 [lun. nov. 1 21:58:28 2021] scsi 5:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4 [lun. nov. 1 21:58:28 2021] sd 5:0:0:0: Attached scsi generic sg7 type 0 [lun. nov. 1 21:58:28 2021] sd 5:0:0:0: [sdg] 60594432 512-byte logical blocks: (31.0 GB/28.9 GiB) [lun. nov. 1 21:58:28 2021] sd 5:0:0:0: [sdg] Write Protect is off [lun. nov. 1 21:58:28 2021] sd 5:0:0:0: [sdg] Mode Sense: 45 00 00 00 [lun. nov. 1 21:58:28 2021] sd 5:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [lun. nov. 1 21:58:28 2021] sdg: sdg1 [lun. nov. 1 21:58:28 2021] sd 5:0:0:0: [sdg] Attached SCSI removable disk [lun. nov. 1 21:59:34 2021] usb 12-3: USB disconnect, device number 5 [lun. nov. 1 22:01:04 2021] usb 12-3: new high-speed USB device number 6 using xhci_hcd [lun. nov. 1 22:01:04 2021] usb 12-3: New USB device found, idVendor=0930, idProduct=6544, bcdDevice= 1.00 [lun. nov. 1 22:01:04 2021] usb 12-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [lun. nov. 1 22:01:04 2021] usb 12-3: Product: TransMemory [lun. nov. 1 22:01:04 2021] usb 12-3: Manufacturer: TOSHIBA [lun. nov. 1 22:01:04 2021] usb 12-3: SerialNumber: FCAED3E59A6BCD40D55CAD68 [lun. nov. 1 22:01:04 2021] usb-storage 12-3:1.0: USB Mass Storage device detected [lun. nov. 1 22:01:04 2021] scsi host5: usb-storage 12-3:1.0 [lun. nov. 1 22:01:05 2021] scsi 5:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4 [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: Attached scsi generic sg7 type 0 [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] 60594432 512-byte logical blocks: (31.0 GB/28.9 GiB) [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] Write Protect is off [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] Mode Sense: 45 00 00 00 [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [lun. nov. 1 22:01:05 2021] sdg: sdg1 [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] Attached SCSI removable disk ricky85@rick:~$

J'édite :
J'ai donc essayé avec cette clé, il a fallu 1,32 minutes pour graver 489,7 mb.
Autre chose qui m'interpelle, pourquoi est ce que mon nouveau "boitier" ne détecte pas les cartes SD ?

diogene · le 02 Nov 2021 07:39

On constate que dans ton dernier exemple, contrairement aux essais précédents, l'insertion de la clé USB se passe normalement, sans générer de messages d'erreur :

Code: Tout sélectionner: [lun. nov. 1 22:01:04 2021] usb 12-3: new high-speed USB device number 6 using xhci_hcd [lun. nov. 1 22:01:04 2021] usb 12-3: New USB device found, idVendor=0930, idProduct=6544, bcdDevice= 1.00 [lun. nov. 1 22:01:04 2021] usb 12-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [lun. nov. 1 22:01:04 2021] usb 12-3: Product: TransMemory [lun. nov. 1 22:01:04 2021] usb 12-3: Manufacturer: TOSHIBA [lun. nov. 1 22:01:04 2021] usb 12-3: SerialNumber: FCAED3E59A6BCD40D55CAD68 [lun. nov. 1 22:01:04 2021] usb-storage 12-3:1.0: USB Mass Storage device detected [lun. nov. 1 22:01:04 2021] scsi host5: usb-storage 12-3:1.0 [lun. nov. 1 22:01:05 2021] scsi 5:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4 [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: Attached scsi generic sg7 type 0 [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] 60594432 512-byte logical blocks: (31.0 GB/28.9 GiB) [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] Write Protect is off [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] Mode Sense: 45 00 00 00 [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [lun. nov. 1 22:01:05 2021] sdg: sdg1 [lun. nov. 1 22:01:05 2021] sd 5:0:0:0: [sdg] Attached SCSI removable disk

On voit que la clé est détectée, identifiée et intégrée sous l'identification "sdg" ; sa partition est reconnue et identifiée sous le nom "sdg1". Tout fonctionne.

Il est vraisemblable que la clé (ou la carte SD) utilisée lors des essais précédents est défectueuse, ou mal insérée.

ricky85 · le 02 Nov 2021 08:24

Bonjour
J'ai cherché et trouver plusieurs sujets sur le net, mais comme je ne veux pas faire de boulette je m'abstiens de faire quoi que ce soit.
Le premier essai que j'ai posté ce n'est pas une clé USB mais une clé support de carte SD.
D'ailleurs lors du premier essai elle était détectée et maintenant que ce soit dans la prise USB2 ou USB3 elle ne l'est plus ?

Je ne comprends toujours pas pourquoi.
-Le fait de passer en USB3 ne change rien a la vitesse de gravure.
-pourquoi mes cartes SD ne sont pas détectées, le boitier s'allume mais c'est tout.

Encore raté quoi, je pensais bêtement que ça allait fonctionner tout seul.
Merci

passer mon pc en usb3 • page 2

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Re: passer mon pc en usb3

Sujets similaires

Qui est en ligne